Valence clip.

replacement-parts/drawer-slide-support.scad

@@ -1,5 +1,5 @@
 $fn=24;
-length = 60;
+length = 100;
 
 module screwHole() {
   color("blue") union() {
@@ -15,10 +15,11 @@ difference() {
     cube([30, 13, length + 10]);
 
     // angled support
-    translate([16, 9, -8]) rotate([0, -17, 0]) cube([30, 4, length + 10]);
+    translate([16, 9, -8]) rotate([0, -10, 0]) cube([30, 4, length + 10]);
 
     // base
     cube([50, 32, 4]);
+
   }
 
   union() {
@@ -26,13 +27,13 @@ difference() {
     translate([-10, -10, -20]) cube([60, 40, 20]);
 
     // X-side flush-cut
-    translate([-8, -2, -length * 0.05]) cube([8, 20, length * 1.1]);
+    translate([-60, -2, -length * 0.05]) cube([60, 20, length * 1.1]);
 
     // channel interior
     translate([3, 3, 4]) cube([23, 9, length]);
 
     // channel side cutaway
-    translate([4, 8, 4]) cube([20, 9, length]);
+    translate([5, 8, 4]) cube([19, 9, length]);
 
     // screw holes
     translate([4.2, 32 - 7.2 - 4, -1]) screwHole();
@@ -40,6 +41,10 @@ difference() {
     translate([25 + 4.2, 32 - 5.7 - 4, -1]) rotate([0, 0, 90]) screwHole();
 
     // top flush-cut
-    color("red") translate([-10, -8, length]) cube([60, 40, length / 2]);
+    translate([-10, -8, length]) cube([60, 40, length / 2]);
+
+    // end chamfer
+    translate([-2, 13.3, length - 19]) rotate([10, 0, 0]) cube([34, 10, 20]);
+    translate([0, 8, length - 16.6]) rotate([-45, 0, 0]) translate([3, -2, 0]) cube([23, 6, 8]);
   }
 }

replacement-parts/valence-clip.scad

@@ -0,0 +1,28 @@
+$fn=24;
+w=1.6;
+h=6;
+
+difference() {
+  union() {
+    cube([14, w, h]);
+    cube([w, 14.3, h]);
+    translate([0, 7.75 - w, 0]) cube([23, w, h]);
+    translate([0, 12 - 1.2, 0]) cube([6, 1.2, h]);
+    translate([15.5 + 6, 12 - 1.2, 0]) cube([5, 1.2, h]);
+    translate([0, 14.3, 0]) cube([3.3, 1.2, h]);
+    translate([20.5 + 3.3, 14.3, 0]) cube([5.3, 1.2, h]);
+    translate([22, 7.75, 0]) rotate([0, 0, -42]) cube([w, 10, h]);
+
+    translate([14, 0, 0]) scale([0.5, 2.2, 1]) cylinder(r=2, h=h);
+
+    // Joint Supports
+    translate([w, w, 0]) cylinder(r = w, h = h);
+    translate([w, 7.75 - w/2, 0]) cylinder(r = w, h = h);
+    translate([w, 12 - w, 0]) cylinder(r = w, h = h);
+    translate([22, 7, 0]) cylinder(r = w, h = h);
+    translate([29, 14.5, 0]) cylinder(r = 1, h = h);
+    translate([26, 11.5, 0]) cylinder(r = 1, h = h);
+  }
+
+  translate([-5, -40, -1]) cube([40, 40, h+2]);
+}