Shure Mic holder for the MODX 8.

hff/modx8-shure-mic-holder.scad

@@ -0,0 +1,68 @@
+include <../lib/rounded-cube.scad>
+
+$fn=256;
+
+d=40;
+l=140;
+
+module version1() {
+  union() {
+    difference() {
+      union() {
+        rotate([0, 10, 0]) cube([d, l, 50]);
+        translate([1.5*d, 0, 0]) mirror([1, 0, 0]) rotate([0, 10, 0]) cube([d, l, 50]);
+      }
+
+      translate([0.75*d, l+1, 0.5*d+12]) rotate([90, 0, 0]) cylinder(d=d, h=l+2);
+      translate([-d, -1, 20]) cube([3*d, l + 2, 40]);
+      translate([-d, -1, -10]) cube([3*d, l + 2, 10]);
+      color("red") translate([-1, l*0.5+4, -124]) rotate([0, 90, 0]) cylinder(d=270, h=1.5*d+2);
+    }
+
+    translate([0, 0, 0.01])
+    difference() {
+      rotate([-20, 0, 0])
+      difference() {
+        union() {
+          rotate([0, 10, 0]) translate([0, 0, -15-0.01]) cube([1.4*d, 12, 30]);
+          translate([1.5*d, 0, 0]) mirror([1, 0, 0]) rotate([0, 10, 0]) translate([0, 0, -15-0.01]) cube([1.4*d, 12, 30]);
+        }
+      }
+      translate([-10, -10, -45]) cube([1.5*d + 20, 30, 35]);
+      translate([-d, -10, 0]) cube([3.5*d, 40, 20]);
+      translate([-10, -10, -20]) cube([1.5*d + 20, 10, 40]);
+    }
+  }
+}
+
+module version2() {
+  difference() {
+    translate([0, 0, -10]) cube([1.5*d, l, 50]);
+
+    // mic handle cut-out
+    translate([0.75*d, l+1, 0.5*d+12]) rotate([90, 0, 0]) cylinder(d=d, h=l+2);
+
+    // top cut
+    translate([-10, -1, 0.5*d]) cube([1.5*d + 20, l+2, 50]);
+
+    // bottom notch cut
+    translate([0, 12, 0]) rotate([-20, 0, 0]) translate([-1, 0, -20]) cube([1.5*d+2, 20, 20]);
+
+    // button flush cut
+    translate([-1, 12, -20]) cube([1.5*d+2, l, 20]);
+
+    // MODX-8 button clearance
+    union() {
+      translate([0, 24, 0]) rotate([-20, 0, 0]) translate([-1, 0, -12]) cube([1.5*d+2, 20, 20.5]);
+      translate([-1, 26.90, -12]) cube([1.5*d+2, l-50, 20]);
+      translate([0, l-20, 0]) mirror([0, 1, 0]) rotate([-20, 0, 0]) translate([-1, 0, -12]) cube([1.5*d+2, 20, 20.5]);
+    }
+
+    // side-cuts
+    translate([-8, 0, 0]) rotate([0, 10, 0]) translate([0, -1, -20]) cube([10, l+2, 50]);
+    color("red")  translate([1.5*d, 0, 0]) mirror([1, 0, 0]) translate([-8, 0, 0])rotate([0, 10, 0]) translate([0, -1, -20]) cube([10, l+2, 50]);
+  }
+}
+
+//translate([2*d, 0, 0]) version1();
+version2();

hff/shure-pg58-handle-cover.scad

@@ -0,0 +1,27 @@
+include <../lib/threads/threads.scad>
+
+$fn=256;
+
+difference() {
+  union() {
+    translate([0, 0, 3.5]) cylinder(d1=34.3, d2=35.7, h=82, $fn=256);
+    cylinder(d1=28, d2=34.3, h=3.5, $fn=256);
+  }
+
+  translate([0, 0, 3.5]) cylinder(d=31, h=90, $fn=128);
+  translate([0, 0, -1]) cylinder(d=27.6, h=10, $fn=128);
+
+  translate([0, 0, 82 + 3.5 - 20 - 4.3])
+  difference() {
+    AugerThread(outer_diam=36, inner_diam=29.8, height=20, pitch=3, tooth_angle=25, tip_min_fract=15);
+    //ScrewThread(outer_diam=33, height=20, pitch=3, tooth_angle=5, tooth_height=0.8);
+
+    color("red")
+    difference() {
+      translate([0, 0, -1]) cylinder(d=40, h=22);
+      translate([0, 0, -2]) cylinder(d=33, h=24);
+    }
+  }
+
+  translate([0, 0, 82 + 3.5 - 4.4]) cylinder(d=33, h=90, $fn=128);
+}